Inductive Proximity Sensors
Capacitive Proximity Sensors
Magnetic Sensors
Photo Sensors
Door/Area Sensors
Fiber Amplifiers
Encoders
Float Sensors
Flow Switches
Color Sensors
Pressure Sensors
Operating Units
Prox. Connectors/Cables
Humidity Sensors
AC Induction Motors
AC Reversible Motors
AC Break Motors
AC Speed Control Motors
PMDC Motors
Small DC Geared
Stepper Motors/Drivers
Gearheads
Blowers
Speed Controllers
DC to AC Single Phase SSR
AC to AC Single Phase SSR
Motor Reversing SSR
DC to AC Three Phase SSR
DC to DC SSR
Heatsinks
TPR Analog Single Phase
Digital Panel Meters – Single Phase
5V DC Output
12V DC Output
15V DC Output
24V DC Output
48V DC Output
Model |
BIR12-TC4FL |
|---|---|
| Sensing Distance | 4mm |
| Supply Voltage | 10-60VDC |
| Switching Hysteresis | Max. 10% of Sr |
| Setting Distance | 4mm ± 10% |
| Function | Break (NC) |
| Standard Detecting target | 12 x 12 x 1mm (Iron) |
| Response frequency | 1 kHz |
| Residual Voltage | Max. 4V |
| Control output | 200mA |
| Certification | CE |
| Protection structure | IP67 |
| Temperature Drift | ±10% Max. of detecting distance at +20ºC within temperature range of –25 to +70ºC |
| Ambient temperature | –25 to +70ºC (non–freezing condition) |
| Ambient humidity | 35 to 95% RH |
| Dielectric Strength | 1500VAC 50/60Hz for 1 minute |
| Indicator | Operating indicator (RED LED) |
| Protection Circuit | Surge protection circuit/ Overload & short circuit protection (except BIR8 series) |
| Insulation Resistance | Min. 50M OHM (at 500VDC) |
| Current consumption | Less than 0.8mA |
| Storage Temperature | –30 to +80ºC (non-freezing condition) |